Twinkly SPI - FAQ
How many controllers do I need?
You will need a minimum of 1 controller for every 1000 addresses (pixels)
You will additionally need 1 power injection for every 100 bulbs (except S14 SPI which is 50 bulbs), a power injection includes the Power T-junction Cable and an SPI power supply, which are sold separately.
What controllers work with my lights?
The Twinkly SPI light sets will utilize a Twinkly SPI 1-port WiFi Controller.
What is the difference between Twinkly SPI and other Twinkly product Lines?
Twinkly SPI light sets are an end to end connectable Twinkly Light set unlike almost all other Twinkly Lights. The bulb count is lower than other Twinkly product lines due to the larger bulb sizes available for SPI compared to the max bulb counts when looking at capsule light sets.
Twinkly SPI is ideal for large roofline and perimeter lighting projects, offering flexibility so long as the lights are a continuous run.
Can I mix light sets?
Unfortunately, each controller will be able to handle one type of bulb. If you have more than one bulb type, you will need multiple controllers.
Can I group with other product lines?
SPI controllers can only connect to other SPI controllers.
For connection styles, please see our other Article here: Twinkly Connectors
Is this compatible with android?
Unfortunately, with SPI you will need to access a Pro Configuration page which is only available to IOS devices. Android will not be compatible.
Can I connect SPI light sets end to end?
Yes, Twinkly SPI light sets will have a female end connector allowing multiple strands to be connected together.
Note: After every 100 bulbs (except S14 SPI which is 50 bulbs) a new power injection will be required
Why does my power injection have a 4-pin and 3-pin?
The 4-pin is connected to the light sets were the 3-pin will be connected to the power supply.
Minimum iOS?
The recommended iOS for using the Twinkly App is iOS 18.1 as of January 2025. We do recommend for the best results, updating your device to the latest IOS software.
Should I go with SPI or other Twinkly products?
SPI is best for lighting projects that require long runs of large bulbs that Twinkly Home, Plus or Pro can’t easily set up.
Are your transformers made for countries outside North America?
The Twinkly products Christmas Designers’ carry are only intended for sale in North America and will only have North American plugs available.
Can I cut these lights to size?
Twinkly Light sets cannot be cut, they are designed to be used as whole sets. Twinkly SPI light sets should allow a high degree of flexibility built in with varying light set lengths and end to end connectivity.
Do I have to install the Twinkly App?
No, you do not have to download the app for basic functions and effects. You can click the button on the controller to choose a built-in effect however, your lights will not be the proper colors until configured and your lights will not be mapped. If you want to change the colors often, map where your lights are or customize the effects, yes, this requires the Twinkly App for all of the cool Twinkly features.
Do I have to have a controller?
Yes, all Twinkly SPI products require a controller to power the lights and connect them to the Twinkly App.
Can I run my SPI controllers from a laptop?
No, you will need to use an IOS Device.
Can I use Twinkly without Wi-Fi or internet access?
Yes, twinkly will work as a stand-alone product or in communication with your smartphone via the Direct Connect Option during Setup.
Note: This does not work if you have more than one controller that you want to communicate in a group.
Can Twinkly SPI be used outside?
Twinkly SPI Lights and controllers are rated IP 65 and are intended for Indoor/Outdoor use
What happens if a light stops working/what is the warranty?
Christmas Designers’ Twinkly lights and controllers come with a 1-year warranty. For more information about Christmas Designers warranty, please visit: https://www.christmasdesigners.com/christmas-designers-warranty-policy
Comments
0 comments
Please sign in to leave a comment.